A distinctive finish
A golden shade, visible fibres and adjustable translucency give printed objects a strong material character.
opening hours
Mon. to Fri. 9 am - 6 pm
Phone
PLA + miscanthus 3D filament
Give your 3D prints a natural material identity
Novifil PLM-20 combines a PLA base with miscanthus fibres to create a golden tone, subtle translucency and a visually distinctive material.
500 g spool€31.85 incl. VAT
Approx. 30 g sample€2.95 incl. VAT
Shipping is calculated by weight and country. France: collection, Mondial Relay Locker, Colissimo, Chronopost or Green Letter depending on format; international: Chronopost.
- Made in France
- Miscanthus from Seine-et-Marne
- 1.75 and 2.85 mm diameters
- Secure payment with Stripe
A material you can see
Miscanthus fibres give the filament a naturally golden colour and an appearance that changes with light and wall thickness.
© Tanguy de Montesson
Origin and traceability
Developed and made in France
- Manufacturing
- France
- Miscanthus
- Seine-et-Marne (77)
- Material
- PLA filled with miscanthus fibres
Choose your format
Start with a sample or order a 500 g spool in the diameter that matches your printer.
500 g spool
PLM-20 1.75 mm
500 g spool
- Diameter1.75 mm
€31.85 incl. VAT
Available to order
500 g spool
PLM-20 2.85 mm
500 g spool
- Diameter2.85 mm
€31.85 incl. VAT
Available to order
Approx. 30 g sample
PLM-20 1.75 mm
Approx. 30 g / 10 m sample
- Diameter1.75 mm
- Approximate length10 m
€2.95 incl. VAT
Available to order
Approx. 30 g sample
PLM-20 2.85 mm
Approx. 30 g / 5 m sample
- Diameter2.85 mm
- Approximate length5 m
€2.95 incl. VAT
Available to order
Designed for projects that celebrate material
Design and decoration
Vases, lighting, decorative objects and short runs where texture contributes to the design.
Architecture and scenography
Models, exhibition elements and installations where colour and translucency become visible.
Prototyping
Functional prototypes and presentation parts with an identity distinct from uniform PLA.
Printer settings
Use the technical data sheet as a starting point, then adjust for your printer, geometry and material profile.
- Nozzle material
- brass (or steel)
- Nozzle diameter
- 0.60 mm
- Nozzle temperature
- 190-220 °C
- Bed temperature
- 60 °C
- Print speed
- 50-100 mm/s
Key technical data
Values declared in the novifil PLM-20 technical data sheet; test methods are specified in the full document.
- Density
- 1.20 g/cm³
- Tensile modulus
- 3,272 MPa
- Breaking stress
- 54.9 MPa
- Flexural modulus
- 2,724 MPa
- Melting temperature
- 152 °C
- VICAT (10 N)
- 57.9 °C
Seen, tested and put to work
Listed by MaterialDistrict
The international materials library features novifil PLM-20 among its bio-based materials and describes its golden, translucent appearance.
View the material listing
Tested by Framboise314
“Novifil™ PLM-20 is a solid product, both ethical and high-performing, ideal for those who want to combine 3D printing with environmental responsibility.”
Disclosure: independent test carried out using a 30 g sample received by the author.
Read the test
Real-world creations
Explore printed objects and installations that show the material’s texture, colour and possibilities.
View the galleryFrequently asked questions
Which diameters are available?
Novifil PLM-20 is offered in 1.75 mm and 2.85 mm, as 500 g spools and approximately 30 g samples.
Which settings should I start with?
The technical data sheet recommends a 0.60 mm nozzle, 190–220 °C, a 60 °C build plate and a speed of 50–100 mm/s.
Can I test it before buying a spool?
Yes. Approximately 30 g samples are available in both diameters so you can validate the finish and your settings.
Why does the finish vary between prints?
Perceived colour and translucency depend in particular on light, geometry and printed wall thickness.
Where is delivery available?
Delivery is available to destinations served by Chronopost. In France, spools can be collected from the workshop or sent to a Mondial Relay Locker or by Colissimo; samples can be collected from the workshop or sent as an untracked Green Letter.
Ready to bring a different material to your prints?
Choose a 500 g spool or begin with an approximately 30 g sample.
Need another package size?
1, 3 or 5 kg spools can be considered on request for your professional projects.